This sketch is missing a short description
weatherCopter
code to run a sensor network used on the towers for the WeatherCopter capstone project.
v1 - GPS only using Adafruit tutorial
v2 - GPS and DS2 now working. Edited Adafruit_GPS, SoftwareSerial, and SDI12 libraries to prevent ISR vector collision.
v3 - (20150305) GPS, DS2, and SD card.
v4 - (20150206) moved from single string storage to multi string storage plus print to file and Serial internal to functions. release version.
author: nathan tyler rose
date: 20150305
board: Seeeduino Stalker v2.3
circuit:
sensor pin
----------------
GPS GND GND
GPS 3v3 3v3
GPS RX 2
GPS TX 3
----------------
DS2 5v 5v
DS2 GND GND
DS2 DATA 8
----------------
SHT 3v3(2) 3v3
SHT GND(3) GND
SHT CLK(1) 6
SHT DATA(4) 7
Embed This Sketch
Use the following HTML code to embed the sketch code above in your blog or website.
<iframe style="height: 510px; width: 100%; margin: 10px 0 10px;" allowTransparency="true" src="https://codebender.cc/embed/sketch:107279" frameborder="0"></iframe>
Embed The Serial Monitor
You can also embed the Serial Monitor section! Just use this HTML code.
<iframe style="height: 510px; width: 100%; margin: 10px 0 10px;" allowTransparency="true" src="https://codebender.cc/embed/serialmonitor" frameborder="0"></iframe>
