Firmware for RGB Shades (Arduino-compatible sunglasses with 16x5 matrix of WS2812B pixels)
Requires FastLED 2.1 or higher, available here: https://github.com/FastLED/FastLED
RGB Shades described here: https://www.kickstarter.com/projects/macetech/rgb-led-shades
When downloading ZIP file, remove "-master" at the end of the folder name before attempting to open in the Arduino IDE
If your RGB Shades were purchased before July 2015: This version has the standard Arduino bootloader. R9 and R10 near the control buttons will be present. Select the “Arduino Pro or Pro Mini (5V,16MHz w/ATmega328)” option..
If your RGB Shades were purchased after July 2015: This version has the Optiboot bootloader. R9 and 10 near the control buttons will be missing. Select the “Arduino Mini w/ATmega328” option.