Arduino_TFT_LCD_ID_readreg by JanJeronimus

Can read info from from my shield with this script!

Read Registers on MCUFRIEND UNO shield controllers either read as single 16-bit e.g. the ID is at readReg(0) or as a sequence of 8-bit values in special locations (first is dummy) reg(0x0000) 01 54 ID: ILI9320, ILI9325, ILI9335, ... reg(0x0004) 00 00 00 00 Manufacturer ID reg(0x0009) 00 1E 00 00 00 Status Register reg(0x0061) 00 00 RDID1 HX8347-G reg(0x0062) 00 00 RDID2 HX8347-G reg(0x0063) 00 00 RDID3 HX8347-G reg(0x0064) 00 00 RDID1 HX8347-A reg(0x0065) 00 00 RDID2 HX8347-A reg(0x0066) 00 00 RDID3 HX8347-A reg(0x0067) 00 00 RDID Himax HX8347-A reg(0x00B0) 00 00 RGB Interface Signal Control reg(0x00B4) 00 00 Inversion Control reg(0x00B6) 00 00 00 00 00 Display Control reg(0x00B7) 00 00 Entry Mode Set reg(0x00BF) 00 00 00 00 00 00 ILI9481, HX8357-B reg(0x00C0) 00 00 00 00 00 00 Panel Control reg(0x00CC) 00 00 Panel Control reg(0x00D0) 00 00 00 Power Control reg(0x00D2) 00 00 00 00 00 NVM Read reg(0x00D3) 00 00 00 00 ILI9341, ILI9488 reg(0x00DA) 00 00 RDID1 reg(0x00DB) 00 00 RDID2 reg(0x00DC) 00 00 RDID3 reg(0x00EF) 00 00 00 00 00 00 ILI9327 reg(0x00F2) 00 00 00 00 00 00 00 00 00 00 00 00 Adjust Control 2 reg(0x00F6) 00 00 00 00 Interface Control